1/24 and 1/25 Model Kit Body Guide
|
Model Kit Manufacturer Codes: RVM = Revell / Monogram |
 |
A roll of Velcro such as this one pictured can go a long
way for mounting many model kit bodies to the FCR Chassis from Parma.
You get over 5 feet which will do many, many cars plus it is a lot
cheaper this way then buying the Parma FCR Velcro strips. They
are basically the same thing. These rolls are make by Sticky Back® Velcro. You can find them in most craft and large department stores. Some stores include Walmart, Ames, Lowe's, etc. |
| By | Item # | Description | Comments |
|---|---|---|---|
| RVM | 2572 | Acura Integra Type R - 3 in 1 | Best to use two screws to secure body to chassis. |
|
RVM |
1994 and up SN95 Ford Mustangs from the 1994, 1995 Mustang GTs (yellow, blue) to the snap 1995 Boss Mustang (black). Also, the 1999 Mustang Cobra, Super Stallion bodies will fit including the '94 '96 Mustang Cobra Convertibles | These bodies fit the 4inch FCR chassis nicely and you can use velcro. One suggestion is if you wish to use the larger Pro-Track tires #319, 320 is to use the 1999 Mustang Cobra since they have wider front and rear wheel well openings. | |
| RVM | 1910 1337 2155 |
The New VW Beetle (1999) -
Yellow The New VW Beetle (1999) - Red The New VW Beetle (1999) - Blue (?) |
requires a screw to hold the
chassis instead of velcro. #1337 is a ProFinish kit (comes pre-decorated) |
| RVM | 1984-96 Corvette Hardtop, Convertible, & ZR-1 | ||
| RVM | 1997-1999 Corvette - all versions | see examples below... | |
| RVM | 1344 | 1999 Corvette Pace Car (LeMans or Daytona) | ProFinish (pre-decorated body) |
| RVM | 2154 | 1999 Corvette Convertible Complete Kit | Body molded in red, have to decide on interior since car does not come with a top for the convertible. |
| RVM | 1919 | 2001 Corvette Z06 - Snap Kit in Yellow | Nice one-piece body for racing |
| RVM | 2536 | Vette AGIN designed by Thom Taylor | |
| MON | 2109 | Mercedes 450 Rally | discontinued kit from 1978, found at show for $8.00 |
| AMT | 30091 | 1962 Ram Blur Custom Rambler American | |
| TAM | 1990 Nissan 300ZX | ||
| TAM | 1995 Mustang Cobra R and Mustang GT/Conv. | ||
| more soon |
| By | Item # | Description | Comments |
|---|---|---|---|
| LIND | 1996 Ford Crown Victoria Police Car | All versions including the new lowrider dancer version! | |
| LIND | 1966 Chevelle SS | ||
| RVM | 7682 | 1980 Ford Bronco 2 'n 1 | Tight wheelbase but will work |
| RVM | 1918 | 1977 Monte Carlo Lowrider | Wheels of Fire Snap Kit - Metallic Blue (nice!) |
| RVM | 1644 | 1963 Chevy Impala Lowrider - Metallic Red | ProFinish Kit with Awesome Factory Painted Body *best to drill a small hole in body and use a screw on each side to attach to chassis because of the tight fit |
| RVM | 7648 | 1966 El Camino | Best to use a Plafit motor to clear bed underneath |
|
RVM |
1310 1311 1312 1313 1314 1315 1316 1317 |
Pre-decorated #24 Dupont Monte Carlo Pre-decorated #3 Goodwrench MC Pre-decorated #6 Valvoline Taurus Pre-decorated #94 McDonald's Taurus Pre-decorated #99 Exide Taurus Pre-decorated #9 Cartoon Taurus Pre-decorated #26 Cheerios Taurus Pre-decorated #5 Kelloggs Monte Carlo |
It is best to trim the lower side panels so they are smooth for a better fit on the chassis. Most of the Monogram and Revell NASCAR kits will fit on the 4.5" chassis from the earliest kits to the new ones. |
| RVM | 2583 | 1970 Buick GSX 2'n1 and earlier GSX kit | |
| RVM | 6440 | 1997 Ford Expedition XLT | Fits but wheelbase is a tad too short for the model |
| RVM | 2576 | 1987 Monte Carlo SS Aeroback | |
| RVM | 2497 | 1987 Buick Grand National - GNX | Used screws to hold body |
| RVM | 2715 | 1970 Chevelle Malibu SS (same as Heavy Chevy) | |
| RVM | 2985 | 1968 Pontiac GTO "Street Machine" | |
| RVM | 2443 | 1969 Pontiac GTO "The Judge" | |
| RVM | 2211 | 1955 Chevy Street Machine and Badman #0229 | |
| RVM | 7640 | Tom Taylor's Alternomad Caprice | |
| RVM | Chevy Caprice Cop Car and Fire Chief / Taxi | ||
| RVM | 6399 | 1994 Chevy Impala SS | |
| RVM | 7669 | 1967 Dodge Charger 426 Hemi 2 'n 1 | |
| RVM | 2343 | 1978 Firebird Trans Am 3 'n 1 | New reissue molded in white, older ones were black |
| RVM | 7686 | '70s Custom Van | Reissue - now molded in white |
| RVM | 1651 | #28 Havoline 2000
Ford Taurus Ricky Rudd ProFinish Glue Kit |
others in this series such as the Chevy Monte Carlo should fit this chassis without any problems |
| RVM | 1653 | '63 Chevy Impala Lowrider ProFinish Gold | prepainted in gold metallic - use screws to attach body |
| AMT | 1960 Ford Starliner | *new release | |
| AMT | 8236 | 1996 Chevy Tahoe | Snap Fast + (Promo
style kit, nicely done body) *looks great with Pro-Track Drag Tires front and rear |
| AMT | 30266 | 1955 Chevy Bel Air | should also fit 55 Nomad as well, tight fit so best to use screws on this one instead of velcro strips |
| AMT | 1966 Chevy Nova - Stock or Street Machine | best to use screws to attach body | |
| AMT | 8210 | 1966 Ford Thunderbird - Convertible or Hardtop | |
| more soon |
If you wish to contribute to this list, please email me at webmaster@slotcargarage.com
About SCG | Swap
Meet | Photo Gallery | Reviews
| Projects | Forums | Email
FAQ | Vintage Slot Cars | My Tracks | Links | SCG News | Web Ring Info | Home